Asphalt Resurfacing: Why Edge Milling Is Important

By July 11, 2022 September 11th, 2022 No Comments

Asphalt Resurfacing: Why Edge Milling Is ImportantYou decided to install an asphalt pavement for several valid business reasons. It was less expensive than a similar concrete pavement, and it could be opened to traffic in less time. Snow melts faster on asphalt than concrete, and asphalt pavements offer superior traction. The luxurious, deep color of asphalt is considered aesthetically pleasing and provides the perfect background for highly visible pavement markings. Furthermore, repair and maintenance procedures are typically economical and fast. Over the years, however, you may become concerned that your aging asphalt pavement no longer conveys the image that you would like to project for your business. You may be tempted to have your existing pavement demolished and rebuilt. Before you choose that option, consult a reputable contractor to determine whether your pavement is a suitable candidate for asphalt resurfacing.

What Is Asphalt Resurfacing?

Resurfacing is a technique that a Long Island commercial paving company can use to renovate an asphalt pavement. When resurfacing asphalt paving Suffolk County contractors virtually always start by grinding away the top two or three inches of the asphalt paving with an asphalt milling machine. New asphalt paving is then installed to replace what the contractor removed.

Are Asphalt Overlays a Type of Resurfacing?

Typically, any asphalt paving company Islip businesses might contact will use the terms interchangeably in most situations. However, asphalt overlays can sometimes be installed on top of concrete pavements that have not had any of their existing material removed.

What Is Edge Milling When Performing Asphalt Resurfacing?

If you look at your asphalt pavement, you will likely find that it connects to other pavements, has catch basins, incorporates curbing and gutters, or has other supplemental features. It is important to keep these features at their proper elevations to prevent rough transitions, eliminate potential tripping hazards, or retain the capacity of the gutters than carry water away from the pavement. By performing edge milling around the edges of metal or concrete supplemental features, contractors can make sure that the resurfaced pavement will offer the same ride and appearance as a newly constructed pavement.

What Are the Advantages of Resurfacing Instead of Rebuilding?

Asphalt overlays are virtually indistinguishable from new pavements in terms of appearance and performance, but an overlay will cost only a fraction of what you would spend to have your pavement removed and replaced. The resurfacing procedure will also be faster, so you can have your pavement receiving traffic sooner. Furthermore, if you maintain your overlay properly, you can repeat the procedure as often as needed, so you could potentially delay the need for a full reconstruction for several decades. In fact, stretches of the interstate highway system have gone more than 50 years with just periodic resurfacing.

How Should an Asphalt Overlay Be Maintained?

Overlays should receive the same care as a new asphalt pavement.

1. As soon as the asphalt has finished curing, have sealcoating applied, then have fresh sealcoating applied about every two years.
2. If cracks develop, have them repaired as quickly as possible.
3. Do not overload your pavement by allowing heavier vehicles than it was engineered to support.
4. Remove oil spills, dead leaves, fuel spills, and trash regularly.

For more information about asphalt resurfacing, contact Royal Pavement Solutions. We are a well-respected Long Island commercial paving company offering a wide array of services, including asphalt paving, asphalt repairs, sealcoating, asphalt overlays, site work, asphalt cracksealing, lot striping, asphalt milling, sweeping and portering, concrete work, and building maintenance. We have a reputation for delivering superb work in an honest, professional manner. If you are interested in requesting a free quote, email [email protected], submit the online form, or call 844-777-7924.